Filter
Top Products
9
TRIPEDGE SERIES
Model 7.5
For 1/2 and 3/4 ton 4x4 Standard Duty
Pickups and Sport Utility Vehicles
STEEL MOLDBOARD SPECIFICATIONS
BLADE WIDTH 7 1/2’
BLADE HEIGHT 27 5/16’’
GAUGE STEEL 12 Gauge
VERTICAL RIBS 6
TYPE OF SPRINGS Extension (4)
NUMBER OF TRIP-EDGE PlNS 6
CUTTING EDGE (OPTIONAL) 2
PLOW WIDTH AT FULL ANGLE 81’’
PUSHFRAME 3” x 2” x 3/16”
PIVOT PIN DIAMETER 1 3/16”
POWER ANGLING RAMS 1 1/2’’ x 10”
AVERAGE SHIPPING WEIGHT 600 lbs.
*weight is based on average depending on specific mounting
POLY MAX MOLDBOARD SPECIFICATIONS
BLADE WIDTH 71/2'
BLADE HEIGHT 29”
MOLD BOARD SHEET THICKNESS 3/8" U.H.M.W. Polyethylene
VERTICAL RIBS 6
TYPE OF SPRINGS Extension (4)
NUMBER OF TRIP-EDGE PINS 6
CUTTING EDGE(OPTIONAL) 2
PLOW WIDTH AT FULL ANGLE 81"
PUSHFRAME 3” x 2” x 3/16’’
PIVOT PIN DIAMETER 1 3/16’’
POWER ANGLING RAMS 1 1/2” x 10”
AVERAGE SHIPPING WEIGHT * 625 Lbs.