Filter
Top Products
Page 63
J-400 Series
Press a second time to deactivate or press RDM button to cancel
RPT function.
4. Searching File or Folder in MP3/WMA CD
To Search File in CDP (MP3/WMA) mode: Press AS/PS button (6) to •
enter track searching mode. Then press the VOL up/down button (3)
to scroll through available tracks. At desired track, press ENT button
(9) to conrm selection. Once a track is selected, it will automatically
begin to play.
To Search Folder in CDP (MP3/WMA) mode: Press and hold AS/•
PS button (6) for 2 or more seconds to enter folder searching mode.
Then press VOL up/down button (3) to search through available
folders. At desired folder, press ENT button (9) to conrm selection.
Once a folder is selected, it will automatically begin to play the rst
track in the selected folder.
5. Display ID3
While in MP3 or WMA track is playing, you can know its ID3
information by following operation:
Press and hold ENT button (9) for about 2 seconds until it displays •
“SHIFT” icon on LCD. Then repeatedly press MODE to display
TITLE, FILE, ARTIST, and ALBUM.
Note: The intervals between each push should be less than 4 seconds.
Once the “SHIFT” icon disappears from the LCD, it would work as
changing mode. After the “SHIFT” icon disappears from the LCD, it would
scroll the selected ID3 information on LCD.
20.5 J-1000™ Audio System USB & NAND Operation
1. Play USB or NAND (internal memory)
Open the front panel and plug a USB device into the USB Docking
Station (10). The USB device will begin to play automatically. Close
the front panel. The “USB” symbol on the display indicates that a
USB device is connected.
To Play connected USB device: Press MODE button (4) to change •
to USB mode. The USB will play. The display (17) shows the current
track, play time, and USB symbol. If no USB device is connected,
simply plug a USB device into the USB docking station (10) and the
unit will automatically switch to USB mode.
To Play NAND: Press MODE button (4) to change to NAND mode. •
The NAND will play. The display shows the current track and play
time. The Play/Pause, Repeat, and Random function for USB and
NAND are the same as CD Player Operation (pages 62-63).