Jacuzzi J - 210 Hot Tub User Manual


 
J-200 Series
10.4 Optional Multi-Colored LED Light System Operation
The multi-colored LED spa light offers seven constant color
variations and three unique random modes for enhanced
spa enjoyment. Press the Light button once to activate the
rst light mode Random Fade, then continue pressing the
button to either turn the light off or to select one of seven
constant colors, random solid color mode or strobe mode as illustrated
below.
Spa Light Sequence
DARK
GREEN
DARK
BLUE
RED
LIME
GREEN
OFF
RANDOM
FADE
RANDOM
SOLID
STROBE
OFF
OFF OFFOFFOFF
OFF OFF
NEAR
WHITE
VIOLET
LIGHT
BLUE
Light Operation Tips:
You must press the light button within 3 seconds of any “off” condition
or the light sequence will revert back to “Random Fade” mode, when
reactivated.
Anytime the spa light is manually activated, it will remain on for 1 hour
then automatically shut off.
10.5 Adjusting Individual Jet Flow
The water ow through individual jets in your spa can be
adjusted or turned off by rotating the outside jet ring. Many
jets also offer an adjustable center nozzle that allows
you to change the water discharge angle. Simply tilt the center nozzle in
these jets to the desired angle to customize your personal massage.
Note: Always keep at least 6 adjustable jets open at all times to ensure
proper ltration characteristics within spa.
10.6 Selecting Desired Massage Action
All models incorporate a massage selector (Diverter
Jet for J-210, Figure A) valve that allows you to
customize the massage and performance by
diverting water between various jet systems within
the spa. Simply turn valve to positions A, B or C to
divert water pressure to various jet groups.
Note: The valve is intended to operate in positions
A (Combo), B, or C for optimum performance. It is
considered normal for sound levels within the valve to increase between
these positions due to the large amounts of water owing through it. For
optimum ltration benets, always leave this valve in position A when the
spa is covered and select positions B or C for maximum jet performance
during spa use.
B
A
C
A
B
C
Figure A
27