Filter
Top Products
J-200 Series
19. Eject Button (Not Illustrated): To eject CD, press OPEN and ip-
down the front access panel, then press the Eject button located to
the left of CD slot.
20. You can switch between
American (USA) and European radio frequency bands by ipping a
switch located on the bottom of the deck. To change bands:
Power down unit.•
Lift up sticker under the CD player.•
Choose desired frequency band as indicated on the sticker.•
Put sticker back in place and power up the unit.•
21. To set the current time, press
and hold Display (6) for 3 seconds until the clock display starts to
blink, then set hours using the Track Up and/or Track Down button
(17). Press Display a second time to set minutes, using the Track Up
and/or Track Down buttons. Press and hold Display a third time to
exit clock setup (or simply wait for 5 seconds).
22. Selecting Weather Band Mode: Press BND (16) while in tuner
mode until WB displays (deck automatically skips to the strongest
weather channel) or press BND a second time to return to previous
mode. When WB weather band mode is active:
Press Track Up (17) to scan to higher weather channel.•
Press Track Down (17) to scan to lower weather channel.•
To save a weather channel preset, press and hold one of six numeric •
keys 1-6.
Note: Weather channel 7 is not accessible through preset key.
23. Display information DISP:
When a retail music CD is inserted, press DISP (6) to change modes
as follows:
Clock (displays for 5 seconds only).•
CD track no./Playtime•
When a CD containing MP3 les is inserted, press DISP (6) change •
modes as follows:
Clock (displays for 5 seconds only).•
Track no./Playtime •
Folder name•
File name•
Song name•
Artist’s name•
Album name•
The system can only display the rst 8 letters of ID3 tags. If the
recorded information is longer than 8 letters, text will scroll to the left
once, then the 8 rst letters will be displayed. If specic info has not
been recorded on an MP3 disc, NO FOLD, NO TRK, NO TLT, NO
ALBM, NO ART will display.
51