Filter
Top Products
English-53
LUBRICATION
The oil level should lie between the markings
on the dipstick. If the level is approaching the
”ADD” mark, fill the oil to the ”FULL” mark on
the dipstick.
Never fill above the ”FULL” mark.
The oil is filled through the hole the dipstick
sits in.
Use engine oil SAE 30 or SAE 10W-30 or,
alternately, 10W/40, class SF–SJ
(over +32 °F / 0 °C).
Over+68°F/+20°CSAE40canbeused.
Use engine oil SAE 5W-20, class SF–SJ
(under +32 °F / 0 °C).
The engine holds 1.6 qt (1.5 liters) of oil
excluding the filter (including filter 1.8 qt,
1.7 liters).
7. Changing the Oil Filter
1. Drain the engine oil in accordance with
the work description under the heading
Engine Oil/Change Engine Oil.
2. Remove the oil filter. If necessary, use a
filter remover.
3. Wipe new, clean engine oil onto the seal
for the new filter.
4. Mount the filter by hand with + 3/4 turn.
5. Run the engine warm, then check that
there are no leaks around the oil filter
seal.
6. Check the oil level in the engine, top up
if necessary. The oil filter holds 0.2 qt
(0.2 liters) of oil.
8009-159
The dipstick markings
8009-140
Engine oils
8011-782
Changing the oil filter