Filter
Top Products
English-30
OPERATION
To operate on hills
To operate on slopes is a dangerous mowing
job. Read the Safety Instructions section
“Driving on Slopes” on page 9.
• The slowest speed possible should be
used before starting up or down hills.
• Avoid stopping or changing speed on
hills.
• Make all turns slowly.
Mowing Tips
• Observe and mark rocks and other fixed
objects in order to avoid collisions.
• The cutting deck should be properly
leveled for best mowing performance.
The blades should be parallel to the
ground or slightly tipped down in the
front.
• Only use sharp blades.
• Check tire pressure. Different pressure
can cause uneven mowing results.
• The left hand side of the deck should be
used for trimming.
• Drive so that clippings are discharged
onto the area that has been cut. Have
the cut area to the right of the mower.
This will result in more even distribution
of clippings and a more uniform cut. To
avoid clippings spraying on roads etc,
mow the first two patterns in opposite
direction.
WARNING!
Do n
ot drive up or down hills
with slopes greater than 10
degrees. And do not drive
across any slopes.
WARNING!
Clear the lawn of stones and
other objects that can be
thrown out by the blades.
8011-409
Mowing patterns