Filter
Top Products
English-34
OPERATION
Adjustment of cutting height
Floating deck machines
1. Stop the mower and disengage the
blades.
2. Raise the deck height lever to the
transport position.
3. Remove the height adjustment pin and
place it in the desired cutting height hole.
Move deck height lever down onto the
pin and mow.
Wheel Motor Adjustment
It is possible to adjust the height of the wheel
motor and the caster wheels, if necessary. Go
to your Husqvarna dealer to adjust the height
of the wheel motor and the caster wheels.
Moving Machine by Hand
In order for the machine to be moved with the
engine turned off, the vent screws on both
hydraulic pumps must be opened 1/4-1/2 turn.
8011-401
1
. Deck height lever
2
. Transport position latch
3
. Height adjustment pin
D
eck height lever
IMPORTANT INFORMATION
Anti-scalp rollers must be in the proper
position for maximum deck floatation. See
the decal on the front deck.
8011-507
Vent screw on the hydraulic pump
WARNING!
Make no adjustments without:
- the engine stopped,
- the ignition key removed,
- the parking brake activated.