Filter
Top Products
English-18
CONTROLS
6. Blade Engagement Switch
In order to engage the blades, pull the knob
out. The blades are disengaged when the
knob is depressed.
The switch energizes the clutch for the V-belt
pulley, placed on the crankshaft, to drive the
blades.
7. Neutral Bail
Keeps the unit from moving while idling. The
neutral bail will lock the motion control levers
in neutral position and must be activated
when starting the engine.
To engage the neutral bail, pull the Ground
Speed Lever fully back and press up the bail
into position according to illustration.
Parking Brake
The machine is braked by the hydraulic
system when the neutral bail is locked in the
neutral position.
The pump release valves must be closed.
Refer to “Pump release valves” on page 22
8011-655
Engaging the mower deck
8011-416
Neutral bail, parking brake position
8011-417
Overflow valves