Filter
Top Products
English-29
OPERATION
Running
1. Pull the ground speed lever fully back.
2. Depress one operator presence lever.
3. Unlock the motion control levers by
pushing the neutral bail down out of the
neutral slots.
4. Slowly set the ground speed lever to the
desired position and release both motion
control levers at the same time to begin a
straight line forward motion.
5. The steering system of this mower uses
individual right and left motion control
levers on the handle bars. Squeezing
one motion control lever will reduce the
flow of oil from the hydro pump to its
wheel motor. The speed of the wheel is
reduced, with the both wheels still under
power, a turn is accomplished.
6. To stop forward travel, pull both levers
back into their stop positions or pull the
ground speed lever fully back.
Reversing
1. Depress one operator presence lever
and pull the ground speed lever fully
back.
2. Unlock the motion conrol levers by
pushing the neutral bail down out of the
neutral slots, but make sure that the
motion control levers are still in the
neutral position even after unlocking the
neutral bail.
3. Depress both of the motion control levers
towards the handles. The machine will
begin to go in a straight line backward
motion
8011-403
1. Operator Presence Lever
2. Motion Control Lever
3. Neutral Bail
4. Handle
ETS-handle with bail in neutral position
8011-422
ETS-handle with motion control levers in reversing
position