Filter
Top Products
English-25
OPERATION
Before Starting
• Read the sections “Safety Instructions”
on page 7, and “Controls” on page 15,
before starting the machine.
• Perform the daily maintenance before
starting (see “Maintenance Schedule” on
page 35).
• Check that there is sufficient fuel in the
fuel tanks.
The following conditions must be fulfilled
before the engine can be started:
• The control for engaging the blades must
be in disengaged position.
• The neutral bail for the motion control
levers must be in the locked position.
Starting the Engine
Electric starter model
1. Make sure that the blades are
disengaged.
8011-668
D
isengaged blades
8011-416
N
eutral lock bail
WARNING!
Do not operate the mower if the
interlock safety system allows
operation or starting in any
unsafe condition.
WARNING!
Never run the engine indoors,
in enclosed or poorly
ventilated spaces. Engine
exhaust fumes contain
poisonous carbon monoxide.
8011-668
Blades disengaged