Filter
Top Products
English – 21
E
Check the engine’s oil level
Check the oil level in the engine when the machine
is horizontal.
Dismantle the engine hood as per the description
on page 20.
Release the dip stick and pull out. Wipe off the oil
and insert again.
The dip stick must be fully screwed down.
Now release the dip stick again and pull out. Check
the oil level.
The oil level should lie between the markings on the
dip stick. If the level approaches the ADD mark, top
up with oil to the FULL mark.
The oil is filled in the same hole as the dip stick is
in.
Use engine oil SAE 30 or SAE 10W-30.
The total oil volume in the engine is 1.2 litres.
MAINTENANCE
ADD
FULL
ADD
FULL
Check the engine’s cooling air intake
Dismantle the engine hood as described on page
20.
Check that the cooling intake is free from leaves,
grass and dirt.
If the cooling intake is blocked this will interfere with
the cooling of the engine, which can damage the
engine.
Checking of the fuel pump’s air filter
Check regularly that the fuel pump’s air filter is free
from dirt.
The filter can when necessary be cleaned with a
brush.
850,970 Eng 97-10-14, 14.2921