Filter
Top Products
English – 9
E
Presentation
These instructions describe two machine models,
Rider 850 and Rider 970.
Both models are fitted with engines from Briggs &
Stratton of 10.5, 12.5 and 15.5 hp.
The machines have gearboxes of the in-line type,
with 5 forward gears and one reverse gear, which
enables selection of the best speed for mowing and
transport.
PRESENTATION
Rider 970 is available with three different cutting
units: unit with rear ejection or side ejection with a
cutting width of 965 mm, and a Bioclip unit with a
cutting width of 1030 mm.
Rider 850 has a cutting unit which throws out the
grass at the rear and a cutting width of 850 mm.
RIDER 850RIDER 850RIDER 850
RIDER 850RIDER 850RIDER 850
RIDER 970RIDER 970RIDER 970
47
6
8 9 10 11
3
5
2
1
Location of the controls
1. Ignition lock
2. Throttle/Choke lever
3. Adjustment of cutting height
4. Lifting lever, cutting unit
5. Gear shift
6. Brake pedal
7. Lock button for parking brake
8. Clutch pedal
9. Adjustment of seat
10. Fuel tank cap
11. Main lock (under seat)
850,970 Eng 97-10-14, 14.299