Husqvarna 968999250 Lawn Mower User Manual


 
REPLACING BATTERY (See Fig. 20)
WARNING
Do not short battery terminals by allowing
a wrench or any other object to contact
both terminals at the same time. Before
connecting battery, remove metal brace-
lets, wristwatch bands, rings, etc.
Positive terminal must be connected first
to prevent sparking from accidental
grounding.
Lift Seat and rotate forward.
Open terminal access doors.
Using two 1/2" wrenches disconnect
BLACK battery cable then RED battery
cable.
Using 7/16" wrench, remove terminal
guard.
Carefully remove the battery from the
mower.
Install new battery with terminals in the
same position as the old battery.
Reinstall terminal guard
First connect RED battery cable to
positive (+) battery terminal with hex bolt
and hex nut.
Connect BLACK grounding cable to
negative (-) battery terminal with
remaining hex bolt and hex nut.
Tighten securely.
Close terminal access doors.
Lower seat.
FIGURE 20
CZ-22
1. TERMINAL GUARD
2. TERMINAL ACCESS DOORS
2
1
SERVICE AND ADJUSTMENT