Filter
Top Products
36
CUSTOMER RESPONSIBILITIES
IN-LINE FUEL FILTER (See Figs. 11 and 12)
The fuel filter should be replaced once each
season. If the fuel filter becomes clogged,
obstructing fuel flow to carburetor, replacement
is required.
• First turn off the fuel valve that is located
under the fuel tank of you mower.
• With the engine cool, remove the filter
and plug fuel line sections.
• Place new filter in position in fuel line with
arrow pointing toward the carburetor.
• Be sure there are no fuel leaks and
clamps are secure and properly
positioned.
• Immediately wipe up any spilled gasoline.
FIGURE 12
1. ENGINE FUEL FILTER
1. FUEL SHUT OFF VALVE
FIGURE 11
CLEANING
• Clean engine, battery, seat, finish, etc. of
all foreign matter.
• Keep finished surfaces and wheels free
of all gasoline, oil, etc.
• Protect painted surfaces with automotive
type wax
We do not recommend using a garden hose to
clean your mower unless the electrical system,
muffler, air filter and carburetor are covered to
keep water out. Water in the engine can shorten
the engine life.
CZ-14
CZ-15
1
1