Filter
Top Products
1.29 1.29
Maintenance
WARNING: PREVENT ACCIDENTS - When carrying out maintenance procedures it is
essential that:
- The engine is switched off, the spark plug lead removed and the ignition switch is in the ‘off’
position.
- The parking break is applied.
- You have read and understood the
maintenance section of the Operator’s Manual.
IMPORTANT: PREVENT DAMAGE - Regular maintenance is essential for the continued safe
operation of the mower. Correct servicing will prolong the working life of the mower and safeguard the
“Hayter Warranty”. Always fit genuine ‘Hayter service parts’ as these are accurately matched to the
required duty.
Dirt and contamination are the enemies of any hydraulic system. When carrying out maintenance pro-
cedures on the transmission system always ensure that the work area and components are thoroughly
clean before, during and after refitting.
The recommended service intervals are based on normal operating conditions. Severe or unusual con-
ditions will necessitate shorter service intervals.
WARNING: PREVENT ACCIDENTS - Remember the engine and transmission oil is hot after mower
use. Allow to cool before carrying out maintenance procedures.
WARNING: PREVENT ACCIDENTS - Use hazardous substances carefully. The following fluids are
identified as being hazardous;
Substances Assessed risk
Petrol High
Lubricating Oil Low
Transmission Oil Low
Gear box oil Low
Grease Low
When using any of the above fluids it is recommended that the eye protection and gloves are worn and care
is taken to prevent spillage.
Avoid contact with skin; wash off spillage with soap and water.
In case of petrol, keep away from all sources of ignition and wash with soap and water. Remove any con-
taminated clothing and wash thoroughly before use.
Avoid contact with eyes; wash with running water and
seek medical attention.
Avoid ingestion; If swallowed seek medical attention.
CAUTION: PREVENT ENVIRONMENTAL DAMAGE - Dispose of hazardous substances correctly.
MAINTENANCE