Filter
Top Products
1.18 1.18
Recommended Lubricants and Hydraulic Fluids
Grease Points: A good quality medium grease
Cutterhead gearbox (rotary): SAE90
Engine: SAE10W-30
Hydrostatic Unit: BP Vanellus M20W, BP Energol HLP22 or equivalent
Transaxle: SAE EP90 Transmission Oil
Should you be in any doubt please contact your Hayter Limited dealer. Using incorrect grades will cause prema-
ture wear of hydraulic components and invalidate warranty.
Verge Attachments
Code 214D Code 243D
Cylinder Drive: V-Belt/Countershaft V-Belt/Countershaft
Cutting Width: 762 mm 762 mm
Cylinder Diameter: 190 mm 190 mm
Cylinder Speed: 1250 rpm 1250 rpm
Height of Cut: 17 mm (0.7˝) to 62 mm (2.4˝) 17 mm (0.7˝) to 62 mm (2.4˝)
Number of Blades: 3 5
Smooth Rear Roller: Standard Standard
Rotary Attachments
Code 212D
Drive: V-Belt/Gearbox
Cutting Width: 762 mm
Type of Blade: 2 disc with swinging blades
Cutterbar Speed: 2860 rpm
Height of Cut: 20 mm (0.8˝) to 55 mm (2.2˝)
Number of Blades: 4 (2 on each disc)
SPECIFICATIONS