Harbor Freight Tools 67596 Pressure Washer User Manual


 
Page 8 For technical questions, please call 1-800-444-3353. SKU 67596
BASIC SPECIFICATIONS
Fuel
Type
89+ octane unleaded
gasoline
Capacity 0.95 Gallons
Engine Oil
Type
(SAE)
10W-30 above 32° F
5W-30 at 32° F or below
Capacity 0.63 Quarts
Pump Oil
3.75 -oz SAE 10W-30
Non-detergent
Engine Speed 3,600 RPM
Water Flow 3 GPM Maximum
Maximum Pressure 2,500 PSI
Note: Additional specications found
in the TECHNICAL ENGINE
SPECIFICATIONS chart in this
manual.
The emission control system for
this Generator’s Engine is warranted for
standards set by the U.S. Environmental
Protection Agency and by the California Air
Resources Board (also known as CARB).
For warranty information, refer to the last
pages of this manual.
At high altitudes, the engine’s
carburetor, governor (if so equipped), and
any other parts that control the fuel-air
ratio will need to be adjusted by a qualied
mechanic to allow efcient high-altitude
use and to prevent damage to the engine
and any other devices used with this
product.
UNPACKING
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon
as possible.
SET UP INSTRUCTIONS
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
Risk of accidental
starting; resulting
in serious personal injury.
Turn the Power Switch of the
equipment to its “OFF”
position, wait for the engine to
cool, and unplug the spark
plug wire(s) before
assembling or making any
adjustments to the equipment.
Note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
WARNING