Filter
Top Products
Page 4 For technical questions, please call 1-800-444-3353. SKU 67596
The work area should have adequate 5.
drainage to reduce the possibility of a
fall due to slippery surfaces.
Wear ANSI-approved safety goggles, 6.
heavy-duty work gloves, and dust
mask/respirator during set up and
use.
Use only oil and fuel recommended 7.
in the “Specications” section of this
manual.
Only use cold Water or pressure 8.
washer detergent in this tool. Do
not use caustic materials, solvents,
ammable materials, or detergents
not designed for pressure washers.
Use of any such material can cause
injury, or damage this tool or personal
property.
Do not dry run this product. Dry 9.
running will cause serious damage
to the seals. Make sure the water
supply used for the Pressure Washer
is not dirty or sandy.
Prior to starting the Pressure Washer 10.
in cold weather, check all of the
parts of the unit to make sure ice has
not formed. Do not store the unit
anywhere that the temperature will
fall below 32° F (0° C).
OPERATING PRECAUTIONS
1. CARBON MONOXIDE
HAZARD
Using an engine indoors
CAN KILL YOU IN
MINUTES.
Engine exhaust contains carbon
monoxide. This is a poison you
cannot see or smell.
NEVER use inside a home or garage,
EVEN IF doors and windows are
open.
Only use OUTSIDE and far away
from windows, doors, and vents.
Keep children away from the 2.
equipment, especially while it is
operating.
Do not leave the equipment 3.
unattended when it is running. Turn
off the equipment (and remove safety
keys, if available) before leaving the
work area.
Wear ANSI-approved safety goggles 4.
and hearing protection during use.
People with pacemakers should 5.
consult their physician(s) before
use. Electromagnetic elds in close
proximity to a heart pacemaker could
cause pacemaker interference
or pacemaker failure. Caution is
necessary when near the engine’s
magneto or recoil starter.
Use only accessories that are 6.
recommended by Harbor Freight
Tools for your model. Accessories
that may be suitable for one piece of
equipment may become hazardous
when used on another piece of
equipment.