Filter
Top Products
9
Maintenance: Clean the filters
Hold the stop unit still with one wrench. Use a
second adjustable wrench or a 17mm deep socket
wrench to unscrew and remove the thermostatic
cartridge.
Rinse the debris from the filters, using a soft tooth-
brush if necessary. Do not attempt to remove the
screens.
Lubricate the o-rings with white plumbers grease.
Reinstall the thermostatic cartridge in the stop unit.
Justify and reinstall the handle.
CAUTION: Turn off the water at the main or with
the service stops, before opening the valve.
Remove the handle and escutcheon.
Grasp the wrench flats on the cartridge stop unit
with an adjustable wrench.
Failure to hold the stop unit steady
while unscrewing or replacing the
thermostat cartridge will result in
damage to the stop unit.
English
wrench flat