Filter
Top Products
5
All other models: Install two Duotec strips
directly on the carrier plate. Install the remaining
two strips on the back of the escutcheon.
Install the carrier plate gasket and carrier plate
with the carrier plate screws.
Press the escutcheon very firmly over the carrier
plate, so that the strips of Duotec interlock, produc-
ing a very firm hold.
Install the handle. Tighten the handle screw
with a 3 mm Allen wrench. The handle screw
must engage the slot milled into the brass on the
cartridge.
Set the high temperature limit stop (optional) -- see
page 8.
Justify the handle -- see page 6.
English
Solaris oval escutcheon only: Install the
white spacers on the carrier plate (a). Install two
Duotec strips on the spacers (b).
Install the remaining two strips on the back of the
escutcheon.
a
b