Filter
Top Products
I. INTRODUCTION
We are proud to offer the Model G1024 Shaper. The Model G1024 is part of a growing Grizzly fam-
ily of fine woodworking machinery. When used according to the guidelines set forth in this manual,
you can expect years of trouble-free, enjoyable operation and proof of Grizzly’s commitment to cus-
tomer satisfaction.
The Model G1024 is intended for use in a home or small professional shop. This shaper features a
3
/4 H.P., 110 / 220V single phase motor and full reversing capabilities. The Model G1024 also fea-
tures a precision-ground cast iron table and
1
/2" spindle. This shaper operates at 10,000 RPM, giv-
ing you plenty of shaping flexibility at a very reasonable price.
A number of optional accessories for the Model G1024 are available through the Grizzly catalog.
They include a heavy-duty mobile base and a router bit spindle, which enable your shaper to use
most standard
1
/2" router bits.
We are also pleased to provide this instructional manual with the Model G1024 Shaper. This manu-
al was written to guide you through assembly, review safety considerations and cover general oper-
ating procedures. It represents our latest effort to produce the best documentation possible. If you
have any constructive criticisms or comments you feel we should include in our next printing, please
write us at the address below.
Manager, Technical Documentation
Grizzly Industrial, Inc.
P.O. Box 2069
Bellingham, WA 98227
Finally, we stand behind our machines. We have two excellent regional service departments at your
disposal, should the need arise. If you have any service questions or parts requests, please call or
write us at the appropriate location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone:(570) 546-9663
Fax:(800) 438-5901
E-Mail: techsupport@grizzly.com
Web Site: http://www.grizzly.com
II. COMMENTARY
To operate this, or any power tool, safely and efficiently, it is essential to become as familiar with its
characteristics as possible. Take as much time as necessary to become acquainted with the Model
G1024 Shaper. The time you invest before you begin to use this machine will be time well spent. Also,
read all of the safety procedures. If you do not understand something, do not operate this machine.
The specifications, drawings and photographs illustrated in this manual represent the Model G1024,
as supplied when the manual was prepared. However, owing to Grizzly’s policy of continuous
improvement, changes to the Model G1024 may be made at any time with no obligation on the part
of Grizzly.
- 3 -