Filter
Top Products
OPERATING
OPERATING - 11
IMPORTANT: Do not allow washer (G) to set on
caster yoke. It must be on top of height-of-cut
spacer bushings (H).
NOTE: Adjust caster wheel spacers to keep
mower deck tilted slightly down at the front.
Adjust caster wheel spacers (F) to compensate front
HOC accordingly.
Setting Cutting Height
NOTE: Before setting cut height, ensure the
tires are all set at the correct tire pressures.
Caster to deck mounting position
Caster to deck mounting - Upper Positon
Rear of Deck Front Casters
Rear Deck Nominal Height C-Spacers C-Spacers Height of Cut Deck Rake
Hole Position Top Bottom (inches) (inches)
1 4.5 NA
1 4.5
1 4.5
2 3.5 0 4 3.5 0
2 3.5 1 3 3 0.5
2 3.5 2 2 2.5 1
3 2.5 2 2 2.5 0
3 2.5 3 1 2 0.5
3 2.5 4 0 1.5 1
Caster to deck mounting - Lower Positon
Rear of Deck Front Casters
Rear Deck Nominal Height C-Spacers C-Spacers Height of Cut Deck Rake
Hole Position Top Bottom (inches) (inches)
1 4.5 1 3 4.5 0
1 4.5 2 2 4 0.5
1 4.5 3 1 3.5 1
2 3.5 3 1 3.5 0
2 3.5 4 0 3 0.5
2 3.5 NA
3 2.5
3 2.5
3 2.5
8.