Filter
Top Products
Part No. 82595 Genie Z-45/25 DC & Genie Z-45/25J DC 33
Operator's ManualSecond Edition · First Printing
Model Z-45/25J DC (jib)
Height, working maximum 51 ft 3 in 15.6 m
Height, platform maximum 45 ft 3 in 13.8 m
Height, stowed maximum 6 ft 7 in 2.0 m
Horizontal reach maximum 25 ft 3 in 7.7 m
Width 5 ft 9 in 1.8 m
Length, stowed 22 ft 3 in 6.8 m
Maximum load capacity 500 lbs 227 kg
Wheelbase 6 ft 8 in 2.0 m
Turning radius (outside) 14 ft 4.3 m
Turning radius (inside) 5 ft 1.5 m
Turntable rotation (degrees) 359°
Turntable tailswing 0 in 0 cm
Power source 8 Group-4H,
6V 315AH Batteries
Drive speed, stowed 3.0 mph 4.8 km/h
40 ft/9 sec 12.2 m/9 sec
Drive speed, 0.6 mph 1 km/h
booms raised 40 ft/45 sec 12.2 m/45 sec
Airborne noise emissions 73 dB
Maximum sound level at normal operating workstations
(A-weighted)
Weight See Serial Plate
(Machine weights vary with option configurations)
Platform dimensions, 6 foot 72 in x 30 in
(length x width) 1.8 m x 76 cm
Platform leveling self-leveling
Platform rotation 180 degrees
Controls 24V DC proportional
AC outlet in platform standard
Hydraulic pressure, maximum 3200 psi 221 bar
(boom functions)
System voltage 48V
Tire size, 2WD Industrial 9-14.5 LT
Gradeability, stowed, 2WD 30%
Ground clearance, minimum 7 in 17.8 cm
Floor Loading Information
GVW+Rated Load 16,600 lbs 7530 kg
Axle load, maximum 12,700 lbs 5759 kg
Wheel load, maximum 7400 lbs 3355 kg
Localized pressure per tire 100 psi 7.03 kg/cm
2
690 kPa
Occupied pressure 311 psf 15.16 kPa
Note: Floor loading information is approximate and
does not incorporate different option configurations. It
should be used only with adequate safety factors.
Continuous improvement of our products is a Genie policy. Product
specifications are subject to change without notice or obligation.