Filter
Top Products
Part No. 82595 Genie Z-45/25 DC & Genie Z-45/25J DC 13
Operator's ManualSecond Edition · First Printing
Maintenance
Observe and Obey:
Only routine maintenance items specified in this
manual shall be performed by the operator.
Scheduled maintenance inspections shall be
completed by qualified service technicians,
according to the manufacturer's specifications
and the requirements specified in the
responsibilities manual.
Maintenance Symbols Legend
The following symbols have been
used in this manual to help
communicate the intent of the
instructions. When one or more of
the symbols appear at the
beginning of a maintenance
procedure, it conveys the meaning
below.
Indicates that tools will be required to
perform this procedure.
Indicates that new parts will be required to
perform this procedure.
Check the Hydraulic Oil Level
Maintaining the hydraulic oil at the proper level is
essential to machine operation. Improper hydraulic
oil levels can damage hydraulic components. Daily
checks allow the inspector to identify changes in oil
level that might indicate the presence of hydraulic
system problems.
1 Be sure that the boom is in the stowed position,
then visually inspect the reservoir on the
hydraulic power unit.
Result: The hydraulic oil level should be within
the FULL and ADD marks on the hydraulic
reservoir.
Hydraulic oil specifications
Hydraulic oil type Chevron Rykon
Premium MV equivalent