Filter
Top Products
Genie Z-45/25 DC & Genie Z-45/25J DC Part No. 82595
Operator's Manual Second Edition · First Printing
Copyright © 1999 by Genie Industries
First Edition: Fifth Printing, April 2002
Second Edition: First Printing, June 2003
"Genie" and "Z" are registered trademarks of
Genie Industries in the U.S.A. and many other
countries.
These machines comply with
ANSI/SIA 92.5-1992.
Printed on recycled paper
Printed in U.S.A.
Important
Read, understand and obey these safety rules and
operating instructions before operating this machine.
Only trained and authorized personnel shall be
permitted to operate this machine. This manual should
be considered a permanent part of your machine and
should remain with the machine at all times. If you
have any questions, call Genie Industries.
Contents
Page
Safety ........................................................................ 1
Controls ..................................................................... 8
Pre-operation Inspection ........................................... 11
Maintenance ............................................................. 13
Function Tests .......................................................... 15
Workplace Inspection ................................................ 20
Operating Instructions ............................................... 21
Transport and Lifting Instructions .............................. 25
Decals ...................................................................... 28
Specifications ........................................................... 32
Contact us:
Internet: http://www.genielift.com
E-mail: techpub@genieind.com