Filter
Top Products
Not for
Reproduction
16
Two 60” (1.5m) lengths of 2” Schedule 40 pipe (C), supplied
by the installer, are required to lift the generator onto cement
pad. Insert pipes through the lifting holes (D) located near
the unit’s base. Use a spreader bar to ensure that the
chains, straps or cables DO NOT touch the generator’s roof.
Hooks may be used in the lifting holes in place of the pipe in
accordance with OSHA or local lifting regulations. Retouch
any chipped paint with supplied touch-up paint.
Lifting the Generator
The generator weighs approximately 1,086 pounds (493 kg).
Proper tools, equipment and qualified personnel should be
used in all phases of handling and moving the generator.
WARNING Hazardous Voltage - Contact with power lines could
cause electric shock or burn, resulting in death or
serious injury.
Lifting Hazard / Heavy Object - Could result in
serious injury.
• If lifting or hoisting equipment is used, DO NOT contact any
power lines.
• DO NOT lift or move generator without assistance.
• Use lifting pipes as described in Lifting the Generator.
• DO NOT lift unit by roof as damage to generator will occur.
A
B
A
B