Fluke PM6681R Outdoor Timer User Manual


 
9-100 Command Reference
:STATus :DREGister0?
80B/81/85
Read Device Status Event Register
This query reads out the contents of the Device Event Register. Reading the De
-
vice Event Register clears the register. See Figure 6-14.
Returned format:
<dec.data> = the sum (between 0 and 6) of all bits that are true. See table below:
Bit No. Weight Condition
24Last measurement below low limit.
12Last measurement above high limit.
:STATus :DREGister0 :ENABle
80B/81/85
8 <bit mask>
Enable Device Status Reporting
This command sets the enable bit of the Device Register 0.
Parameters:
<dec.data> = the sum (between 0 and 6) of all bits that are true. See table below:
Bit No. Weight Condition
24Enable monitoring of low limit
12Enable monitoring of high limit
Returned format: <bit mask>¿