Filter
Top Products
8
1.6 RIDING ATTACHMENTS
1.6.1 Use only Exmark riding attachments. The use of other than Exmark riding
attachments may create a hazardous condition resulting in injury.
1.7 SAFETY SIGNS
1.7.1 Keep all safety signs legible. Remove all grease, dirt and debris from safety
signs and instructional labels.
1.7.2 Safety signs must be replaced if they are missing or illegible.
1.7.3 When new components are installed, be sure that current safety signs are
affixed to the replaced components.
1.7.4 New safety signs may be obtained from your authorized Exmark equipment
dealer or distributor or from Exmark Mfg. Co. Inc.
1.7.5 Safety signs may be affixed by peeling off the backing to expose the adhesive
surface. Apply only to a clean, dry surface. Smooth to remove any air bubbles.
1.7.6 Familiarize yourself with the following safety signs and instruction labels. They
are critical to the safe operation of your Exmark commercial mower.
PART NO. 1-303517
LOCATION: Left Side of Rear
Surface on Engine Deck
PART NO. 1-403143
LOCATION: Right Side of Rear
Surface on Engine Deck
PART NO. 1-403005
LOCATION: Front Corners of Mower Deck
36” – RH Front Corner
48” – RH & LH Front Corners
PART NO. 1-303508
LOCATION: On Top Rear Right Hand
Surface of Mower Deck
PART NO. 1-413214
LOCATION: Right Side of Hydro
Control Crank Arm
PART NO. 1-323427
LOCATION: 36” Deck