Filter
Top Products
- 11 -
2.5 SAFETY INTERLOCK SYSTEM
Operator must have speed control lever in neutral, PTO disengaged, (and OPC
levers depressed for electric start) to start engine. Release of OPC levers will cause
the engine to stop if speed control lever is not in neutral and/or PTO is engaged.
2.6 STEERING CONTROL
Fingertip drive control levers provide independent speed control, braking, and neutral
to each drive wheel for moving forward or reverse, stopping, and power turning.
2.7 TRANSMISSION:
Twin Hydrostatic Drive
2.7.1 Two Hydro Gear BDP-10A series variable displacement high efficiency pumps
independently coupled to two high efficiency Parker/Ross wheel drive motors.
2.7.2 Hydraulic Filter is replaceable cartridge type.
P/N 1-513211: 10 microns, 18 psi bypass (Summer use above 32°
F (0°C))
P/N 1-523541: 40 microns, 18 psi bypass (Winter use below 32°
F (0°C))
2.7.3 Speed Range: Forward 0 - 6.2 mph (10.0 km/h)
Reverse 0 - 2.2 mph (3.5 km/h)
2.8 WHEEL DRIVE SYSTEM
Drive wheels are direct coupled to Parker/Ross wheel drive motors with 1.0"
(25.4 mm) tapered shaft.
36” Drive 48” & 52” Drive Front Caster
2.9 TIRES
Pneumatic (Air-Filled) Pneumatic (Air-Filled) Semi-Pneumatic
Size 16 x 6.50-8 16 x 7.50-8 9 x 3.50-4
Quantity 2 2 2
Tread Turf Master Turf Master Smooth
Ply Rating 4 4
Pressure 14 psi (97 kPa) 14 psi (97 kPa)
2.10 DECK
2.10.1 Cutting Width:
Model 36 in. ........................................ 35.25 in. (89.5 cm)
Model 48 in. ........................................ 47.25 in. (120.0 cm)
Model 52 in. ........................................ 52.00 in. (132.1 cm)
2.10.2 Discharge: Right Side
2.10.3 Blade Size:
Model 36 in. .............. 18.00 in. (45.7 cm) ..............Qty. 2
Model 48 in. .............. 16.25 in. (41.3 cm) ..............Qty. 3
Model 52 in. .............. 18.00 in. (45.7 cm) ..............Qty. 3
2.10.4 Type of Drive: Manual engagement of belt with over-center lock. Belt tension is
adjustable via turnbuckle.
2.10.5 Deck Mounting: Full floating deck is attached to out-front support frame,
removable for service.
2.10.6 Cutting Height: Adjusts in 1/2” (1.3 cm) increments from 1.5” (3.8 cm) to 4 1/2”
(11.4 cm).
2.11 DIMENSIONS
2.11.1 Overall Width: 36” 48” 52”
46.25” 58.25” 62.6”
Discharge chute down
(117.5 cm) (148.0 cm) (159.0 cm)
Discharge chute up
36.1” 48.1” 53.0”
(Transport only)
(91.7 cm) (122.2 cm) (134.62 cm)