Filter
Top Products
Reference Manual
00809-0200-4801, Rev BA
April 2007
Rosemount 3051S
3-28
If you already own a National Instruments Fieldbus interface device, you can
go to rosemount.com to download the 3051S revision 23 Device Description.
If you don’t already own a National Instruments Fieldbus interface device,
contact your local sales person for ordering options.
NOTE
Could affect block execution times.
ENGINEERING
ASSISTANT SOFTWARE
Installation and Setup Installing the 3051S Engineering Assistant for FOUNDATION Fieldbus
Operation of the software requires installation of both the 3051S Engineering
Assistant (EA) for F
OUNDATION Fieldbus program and FOUNDATION Fieldbus
communication card drivers. The 3051S Engineering Assistant for
F
OUNDATION Fieldbus and 3051S Engineering Assistant for HART can be
loaded onto the same computer. However, the programs cannot be opened
simultaneously. Upgrades for the 3051S Engineering Assistant are available
on www.rosemount.com.
1. Follow the instructions below to complete required software
installation.
a. Place 3051S EA Software CD-ROM disk 2 into the disk drive.
b. Browse and select the EA-Ff folder using Windows NT, 2000, or
XP.
c. Open the ReadMe.txt file and follow the instructions provided.
2. Install the F
OUNDATION Fieldbus PCMCIA communications card into
the machine by following instructions provided with the card.
Installation of the communications card is not required for offline
operation of the 3051S EA for F
OUNDATION Fieldbus software
program.