Filter
Top Products
Reference Manual
00809-0200-4801, Rev BA
April 2007
Rosemount 3051S
www.rosemount.com
Section 3 Configuration
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-1
Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-1
Device Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-2
General Block Information . . . . . . . . . . . . . . . . . . . . . . . . . page 3-3
Resource Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 3-4
Analog Input (AI) Function Block . . . . . . . . . . . . . . . . . . . page 3-8
Multiple Analog Input (MAI) Function Block . . . . . . . . . . page 3-16
LCD Transducer Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-18
Advanced Diagnostics Transducer Block (ADB) . . . . . . . page 3-21
Mass Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 3-27
Engineering Assistant Software . . . . . . . . . . . . . . . . . . . . page 3-28
OVERVIEW This section covers basic operation, software functionality, and basic
configuration procedures for the Rosemount 3051S pressure transmitter with
F
OUNDATION fieldbus. This section is organized by block information. For
detailed information about the function blocks used in the Rosemount3051S
pressure transmitter, refer to “Foundation Fieldbus Block Information” on
page A-1 and the F
OUNDATION fieldbus Block manual (00809-0100-4783).
SAFETY MESSAGES Procedures and instructions in this section may require special precautions to
ensure the safety of the personnel performing the operations. Information that
raises potential safety issues is indicated by a warning symbol ( ). Refer to
the following safety messages before performing an operation preceded by
this symbol.
Warnings
Explosions can result in death or serious injury.
• Do not remove the transmitter covers in explosive environments when the
circuit is live.
• Transmitter covers must be fully engaged to meet explosion proof
requirements.
• Before connecting a configuration tool in an explosive atmosphere, make sure
the instruments in the loop are installed in accordance with intrinsically safe or
nonincendive field wiring practices.
Electrical shock can result in death or serious injury.
• Avoid contact with the leads and terminals. High voltage that may be present
on leads can cause electrical shock.