Pr o Th a T c h aT T a c h m e n T
oP e r a T o r 's ma n u a l
13
Component/System Maintenance Procedure Skill Level Frequency
Drive Shaft Grease 1 Every 25 hours of use
Gear Housing Grease 1 Every 25 hours of use
Tines Inspect/Tighten/Replace 1 Before each use
Screws/Nuts/Bolts Inspect/Tighten/Replace 1 Before each use
l u b r I c a t I o n
Level 1.
Tools Required: 13 mm Open End Wrench, Clean Rag
Parts Required: EP "0" OR "00" Grease.
Gear Housing
1. Clean all loose debris from gear housing.
2. Remove screw plug (A) and check level of grease.
3. Add grease if necessary, DO NOT over ll.
4. Install screw plug (A).
A
m a I n t e n a n c e I n t e r v a l s
WARNING
Moving parts can amputate ngers or cause severe injuries. Keep hands, clothing and loose objects away from all
openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete
stop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service.
Wear gloves to protect hands from sharp edges and hot surfaces.
ma I n t e n a n c e
Your ECHO attachment is designed to provide many hours of trouble free service. Regular scheduled maintenance will
help your attachment achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to
take your unit to an ECHO Service Dealer for maintenance. To help you decide whether you want to DO-IT-YOUR-
SELF or have the ECHO Dealer do it, each maintenance task has been graded. If the task is not listed see your ECHO
dealer for repairs.
s k I l l l e v e l
Level 1 = Easy to do. Most required tools come with unit.
Level 2 = Moderate difculty. Some specialized tools may be required.