Filter
Top Products
Pr o Th a T c h aT T a c h m e n T
oP e r a T o r 's ma n u a l
11
IMPORTANT
Do not rotate wheels against tines. Wheels and tines will be dam-
aged during operation.
If wheel rotation is not sufcient to provide proper wheel height clear-
ance then perform these additional steps:
4. Loosen two upper wheel bracket bolts (C) with 10 mm wrench.
5. Slide fender/wheel assembly up drive shaft housing until proper
wheel clearance is achieved. Tighten hex head bolts (C).
f r o n t j-h a n d l e a d j u s t m e n t
Tools Required: 10 mm Open End Wrench
Parts Required: None
1. Loosen two (2) J-Handle bracket bolts (A) with 10 mm wrench.
2. Rest dethatcher tines on at surface. Stand to left side of drive
shaft housing with right hand on throttle grip and left hand on
J-Handle.
3. Move J-Handle up or down drive shaft housing for comfortable
operating position. Tighten J-Handle bracket bolts (A).
C
A
A