Craftsman 536.8884 Snow Blower User Manual


 
CUSTOMER RESPONSIBILITIES
SERVICE
RECORDS
SCHEDULE
Fill in dates as After Before As Every Every Each 3efore
first2 Each Neede¢ 10 25 Season 3torage!
you complete Houra Use Hours Hours
regular service
SERVICE
DATES
Check EngineOil Level p_' p4
Change EngineOil _ i,J
Tightenall screwsandnuts
Check TractionClutch Cable t'J _ P_
Adjustment(See cableAdj) p_ p/
ReptscaSparkP|ug _ If
Replace DriveBelts p_
Lubricate all pivotpoints pJ
DrainFuel i_J
Check AugerClutchCable
Adjustment(See Cable AdD P_
LubricateDiscDdve Plate Zerk _ t,J
GENERAL RECOMMENDATIONS LUBRICATION CHART
The warranty on this snow thrower does not
cover items that have been subjected to op
erator abuse or negligence. To receive full LubricateDiscDdve Plate Zerk
value from the warranty, the operator must witha Hi Temp EP MolyGrease.
maintain the snow thrower as instructed in
this manual. The above chart is provided to
assist the operator in properly maintaining
the snow thrower.
Some adjustments will need to be made pe-
riodicafly to property maintain your snow
thrower.
AFTER FIRST USE
Check the tracks for tension and adjust if
necessary (see first figure on page f 6).
Check the track adjustment and fasteners
regularly.
Be sure that all fasteners are tight.
AS REQUIRED _
The following adjustments should be
performed more than once each season.
All screws and nuts should be checked
often to make sure they are tight, prefer-
able after each use.
If any parts are worn or damaged, replace
immediately.
15