Filter
Top Products
Eo to]
KNOW YOUR SNOW THROWER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
SNOW THROWER. Compare the illustrations with your SNOW THROWER to familiarize
yourself with the location of various controls and adjustments. Save this manual for future
reference.
rDrive Lever
Primer
Button
Electric
Starter
Button
Discharge
Ignition Recoil
Key Starter
Handle
Control Control
Auger Drive Lever- Starts and stops the
auger and impeller (snow gathering and
throwing). The auger assists in the self pro-
pelling.
Crank Assembly - Changes the direction of
snow throwing through the discharge chute.
Chute Deflector - Changes the distance
the snow is thrown.
Discharge Chute - Changes the direction
the snow is thrown.
Ignition Key - Must be inserted to run, pull
out to stop.
Electric Starter Button - Used to start the
engine using the 120 V. electric starter.
Recoil Starter Handle - Starts the engine
manually.
Choke Control - Used to start a cold en-
gine.
Primer Button - Injects fuel directly into
the carburetor manifold for fast starts in
cold weather.
Throttle Control - Controls the engine
speed.
Shear Bolt - Designed to break (to protect
the machine) if an object becomes lodged
in the auger housing. Use of a harder bolt
will destroy the protection provided by the
shear bolt.
Toolbox - Spare shear pins and spacers
are located in toolbox.
These symbols may appear on your unit. Learn and understand their meaning.
Engine Engine Off Choke On Fast Slow Stop Fuel Oil Primer
Start Run Button