Craftsman 536,884,791 Snow Blower User Manual


 
CUSTOMER RESPONSIBILITIES
SERVICE
RECORDS
Fill in dates as
you complete
regular service
Check Engine Oil Level
Change Engine Oil
Tighten All Screws & Nuts
Lubricate Pivot Points
Check Auger Clutch Cable
Adjustment (See Cable Adj)
Check Ddve Bert
Check Fuel
Drain Fuel
Replace Spark Plug
After
first 2
Hours
SCHEDULE
SERVICE
DATES
Before AS Every Ever_ Every
Each Needed! 5 10 25
Use Hours Houri Hours
_" v"
p-
v*
Each Before
Seaso¢ Storage
v"
PRODUCT SPECIFICATIONS
HORSE POWER: 5HP
DISPLACEMENT: 12.04 cu. in.
GASOLINE CAPACITY: 2 quart
(unleaded)
OIL (20 oz. Capacity) : 5W-30
;PARK PLUG: Champion RJ19LM
(Gap .030) or
Equivalent
VALVE CLEARANCE: Intake: 0.10 In.
Exhaust: .010 In.
SNOW THROWER
AFTER FIRST USE
Check for any loose or damaged parts.
Tighten any loose fasteners.
Check and maintain the auger.
AFTER EACH USE
Remove all snow and slush off the snow
thrower to prevent freezing of auger or
controls.
Check controls to make sure they are
functioning properly.
If any parts are worn or damaged,
replace immediately.
SNOW THROWER
ENGINE LUBRICATION
Check the crankcase oillevel (see figure be-
low) before starting the engine and after
each five (5) hours of continuous use. Add
S.A.E. 5W30 motor oil as needed. Tighten
fill cap/dipstick securely each time you
check the oil level. S.A.E. 0W30 motor oil
may be used to make starting easier in ar-
eas where the temperature is 20° F or
lower.
e
v betweenfull and addmark
I
13