Craftsman 536.88113 Snow Blower User Manual


 
TROUBLE
Difficultstarting
Engine runs erratic
Engine stalls
Engine runs erratic;
Loss of power
Excessive vibration
,CAUSE
Defective spark plug.
Water or dirt in fual system.
Blocked fuel line, empty gas
tank, or stale gasoline
CORRECTION
Replace spark plug.
I Use carburetor bowl drain to
flush and refill with fresh fuel.
)rive belt loose or damaged.
Incorrect adjustment of
traction drive cable
Clean fuel line; check fuel
supply; add fresh gasoline
Unit running on CHOKE. Set choke lever to RUN
_osLtion.
Water or dirt in fuel system. Use carburetor bowl drain to
flush and refill with fresh fuel.
Loose parts: damaged Stop engine immediately and
impeller disconnect spark plug wire.
Tighten all bolts and make all
necessary repairs. If
vibration continues, have the
unit serviced by a Craftsman
service repairman.
Unit fails to propel Itself Replace drive belt.
Adjust traction drive cable.
i Worn or damaged friction
wheel.
Auger drive belt loose or
damaged.
Unit falls to discharge
snow
Replace friction wheel,
Adjust auger drive belt;
replace if damaged.
Auger control cable not Adjust auger control cable.
adjusted correctly.
Shear bolt broken Replace shear bolt
Discharge chute clogged. Stop engine immediately and
disconnect spark plug wire.
Clean discharge chute and
inside of auger housing,
Foreign objectlodgedin
auger
Stop engine immediately and
disconnect spark plug wire.
Remove object from auger.
F-OOIOSOJ 30