Filter
Top Products
bPj=l--Iri_l[i]_]
KNOW YOUR SNOW THROWER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR SNOW THROWER. Compare the illustrations with your SNOW THROWER
to familiarize yourseff with the location of various controls and adjustments. Save
this manual for future reference.
Auger. Lever
Electric Drive Lever (left hand)
Start (right hand) , Remote
Button
Primer Chute Control
Switch ;rank
Box Assembly
Chute Deflector
Discharge
Chok_
Control Recoil
Throttle Starter
Control Handle
Figure 14
Auger Drive Lever - Starts and stops
the auger and impeller (snow gathering
and throwing)
Traction Drive Lever - Propels the
snow thrower forward and in reverse.
Speed Shifter Lever - Selects the
speed of the snow thrower (6 speeds for-
ward and 2 speeds reverse).
Crank Assembly - Changesthe direction
of snow throwingthroughthe discharge chute.
Chute Deflector - Changes the distance
the snow is thrown.
Discharge Chute - Changes the height
anddirectionthe snowis thrown.
Height Adjust Skid - Adjusts the ground
clearance of the auger housing.
Ignition Key - Must be inserted to start
the engine.
Recoil Starter Handle - Starts the en-
gine manually.
F-OO1060J
Choke Control - Used to start a cold
engine.
Primer Button - Injectsfuel directly into
the carburetor manifold for fast starts in
cold weather.
Remote Chute Control Lever - Push
forward to discharge snow high and far.
Pull remote lever back to dischargesnow
down.
Throttle Control - Controls the engine
speed.
Electric Start Button - (If so equipped)
Usedto startthe engineusingthe 120V Edec-
tnc starter.
Shear Pin -Shear pins are designed to
break (to protect the machine) if an ob-
iect becomes lodged in the auger hous-
Ing.
Toolbox -spare shear pins and spacers
are located in toolbox,
12