Craftsman 536.88113 Snow Blower User Manual


 
CUSTOMER RESPONSIBILITIES
SERVICE RECORDS
Fill in dates as you Before Every Every Every
complete regular Each 5 10 25 Each Belore
service. Use Often Hours Hours Hours Season Storage
Check Engine Oil Level _/ _/ _/
Change Engine Oil _/ _/
Tighten All Screws and _ _/
Nuts
Check Spark Plug _/ _/
Lubricate AllPivot
Points _/ 3'/
Lubricate Oisc Drive
Plate Zerk _/
See Maintenance)
Check Fuel _/
Drain Fuel
Check Cable
Ad ustment
(See Cable Ad ustment) _/
Adjust Drive Belt _/ V
SERVICE
DATES
GENERAL RECOMMENDATIONS
The warranty on this snow thrower
does not cover items that have been
subjected to operator abuse or negli-
gence. To receive full value from the
warranty, the operator must maintain
the snow thrower as instructed in this
manual.
Some adjustments will need to be
made periodically to properly maintain
your snow thrower.
All adjustments in the Service and Ad-
justments section of this manual
should be checked at least once each
season.
AFTER EACH USE
Check for any loose or damaged
parts.
Tighten any loose fasteners.
Check and maintain the auger.
Check controls to make sure they
are functioning properly.
F-O0106OJ
If any parts are worn or damaged,
replace immediately.
LUBRICATION CHART
Lubricate
Disc Drive
Plate Zerk
With a Hi
Tem
Moly
Grease.
18
Figure 19