Filter
Top Products
REMOVING DOZER BLADE FROM TRACTOR
1_ Lower blade to ground with blade in the center
(straight ahead) position.
,
Refer to figure 37 below:
A, Remove cotter pins and lift links from side plates,
B, Remove attachment rod from blade frame
assembly,
C, Pull blade frame assembly from side plates,
RECOMMENDATIONS WHEN STORING
When the dozer is not being used, remove all dirt and
rust and touch up with paint.
Apply a light coat of grease or rust prevention to the
blade and oil pivot points.
, Store in an area where it is protected from weather.
, Store in a dry area, protected from weather.
NOTE: Frame brackets do not require removal unless a
different attachment is mounted to front of tractor,
ATTACHMENT
COTTER ,
\
\
\
UFT LmNK
CLEVmS
PIN
FIGURE 37
These and other accessories are recommended for use with your unit, Call 1-800-4-MyoHOME®to find out ifthey are available,
if available, they may be purchased at most Craftsman outlets or by calling I°800°4-MyoHOME®,
TIRE CHAUNS
WEIGHT BRACKET
FOR DRAW BAR
SNOW CAB
17