Filter
Top Products
CUSTOMER RESPONSIBtLmTIE$
, Read and follow the maintenance schedule and the maintenance procedures listed in this section,
MAINTENANCE SCHEDULE //__/',,_//_
Fill in dates as you __/_ _x_"
complete regular service. Service Dates
Check for loose fasteners X
Check scraper and shoes for wear _ X .................
Clean Blade X X
Lubricate Blade X
CHECK FOR LOOSE FASTENERS
, During the operating season, check al! bolts, nuts and
hairpin cotters to be sure they are secure.
CHECK SCRAPER AND SHOES FOR WEAR
, During the operating season, check the scraper and
shoes for wear before each use. After extensive use
and wear, the scraper bar may be reversed to utilize
the unused top edge. See figure 36.
CLEAN BLADE
• During the operating season, clean the blade off after
each use. Touch up any bare metal with paint or
apply a light coat of grease or rust preventive.
LUBRICATE BLADE
Oil al! pivot points each season so they will work
freely.
BLADE
ASSEMBLY
SCRAPER
BAR
CABRtAGEBO_S
AND NUTS
FIGURE 36
PROBLEM CAUSE CORRECTION
Blade is difficult to raise. Lift mechanism is binding. Lubricate pivot points.
Blade is difficult to pivot. Handle tube is binding on lift rod. Lubricate lift handle rod.
Blade will not unlock to pivot.
Lock mechanism is out of adjustment
and is not disengaging.
Refer to the Operation section on
page 14.
16