Filter
Top Products
* OPERATION
KNOW YOUR CHAIN SAW(Fig. 6)
READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR CHAIN SAW.Compare the illus-
trations with yourunitto familiarizeyourselfwiththe locationofthe various controlsand adjustments. Save this manual for
future reference.
Front
Hand_( Handle
Chain
Starter
RopeHandle
On/Stop
Switch
Primer
CRRFTSNRN"
Throttle
Lockout
CylinderCover
BarOil
FillBar Starter Fill Cap
Housing
Adjusting
Screw
Rear
Handle CHAIN TRAVEL
DIRECTION
CRRFTSMRN"
Guide Bar
Throttle BarClamp
Trigger Knob Bar_ Nuts
Figure6
Listed by Underwriters Laboratories, Inc.
in accordance with American National Standards for Gasoline-Powered Chain Saws Safety Requirements
(ANSI B175.1-1991 ).
The ONISTOP SWITCH is used to stop the engine.
The STARTER ROPE HANDLE is used for starting the
engine. •
The CHOKE KNOB activates the choke to provide addi-
tional fuel to the engine when starting a coldengine.
The THROTTLE LOCKOUT prevents the THROTTLE
TRIGGER from being squeezed accidentally.
The THROTTLE TRIGGER controlsengine speed.
The GUIDE BAR is designed to carry the chain.
The CUTTERS are designedto cut the wood,
The BAR CLAMP NUTS are designed to hold the guide
bar after adjustments have been completed.
The ADJUSTING SCREW is designed to tension the chain
on the guide bar.
The PRIMER BULB circulates fuel to the carburetor.
" -8-