Filter
Top Products
r _,.:
SERVICE AND ADJUSTMENTS
• Pullout 10"ofropeand catch ropein notchinthepulley.
• Carefully turn the pulley twocomplete turnsclockwise,
keeping the ropeagainstthe notchto windthe spdng.
• While holding the pulley ratchet,pull the excess rope
through the starter rope hole.While holdingtension on
the rope, let rope slowlyrewindintothe housing.
• Reinstallfan housing by aligningthe fan housingtothe
chassis.Then while holdingthe fan housingagainst the
chassis, pull the rope handleout until you feet the fan
housing drop into place againstthechassis. Slowly,let
the rope rewindinto starter housing.
• Reinstall the 4 fan housing screws and tighten the 2
cylindercoverscrews. Figure44.
Wind Up Spring
Rewind for-
Tension
Figure48
"C_'-
°
_T._._
r
• - 24-