Filter
Top Products
7
ASSEMBLY
Figure 4
Figure 5
Figure 6
4. Place the 4-way chute control in a centered position. See Figure 4.
5. Place chute assembly onto chute base (forward-facing) and secure
chute control assembly to chute support bracket with clevis pin and
cotter pin removed earlier. See Figure 5.
6. Finish securing chute control assembly to chute support bracket
with wing nut and hex screw removed earlier. See Figure 6.
7. Check that all cables are properly routed through the cable guide
on top of the engine. See Figure 7.
Figure 7