Filter
Top Products
28 NEUTON EM 4.1 Cordless Electric Mower Safety & Operating Instructions
The NEUTON Trimmer
The NEUTON™ Trimmer (Figur e 27) is a unique
attachment that, used with your NEUTON Mower,
enables you to trim and edge your lawn and yard
without having to buy a separate trimmer and edger
— like three machines in one.
The Trimmer is described in a separate manual, the
NEUTON™ Trimmer Safety & Operating Instructions
(which is shipped with the NEUTON Trimmer).
For more information about the NEUTON Trimmer
attachment, please contact Country Home Products at
1-(866)-NEUTON1 (638-8661) or visit us on the Web
at www.neutonowners.com.
Using the Rear Bagger
The rear bagger lets you catch clippings as they are cut, eliminating the need to rake. Before using it
though, you must first assemble it.
Assembling the Rear Bagger
The rear bagger comes in three parts: the bagger, a cover, and a steel frame. To assemble the rear
bagger :
1. Attach the front of the steel frame to the front of the bagger. Make sure the frame is securely
snapped into place.
2. Snap the cover onto the bagger.
3. Snap the front of the cover onto the steel frame.
Make sure all of the connections are secure before using the bagger.
Attaching the Rear Bagger
1. Raise the hinged discharge guard on the rear of the
mower, and hold it open.
Remove the mulching plug or the rear discharge plate, if
either is installed. (The plug is seated in the chute by
“press fit” and it may be necessary to pull quite hard.)
2. With your other hand, insert the rear bagger into the
slots on both sides of the mower (Figure 28).
3. Press the pin on the discharge guard into the hole on
the top of the rear bagger.
4. Lock the rear bagger in place by sliding the orange tab
on the handle over the discharge guard.
Figure 28. Attaching the rear
bagger
Figure 27. The NEUTON Trimmer
attached to your NEUTON Mower