Filter
Top Products
12 NEUTON EM 4.1 Cordless Electric Mower Safety & Operating Instructions
Step 5: Attach the Cable to the Handlebar Assembly
1. Run the cable through the cable guide tab
(Figure 6) on the right lower handlebar section.
2. Align the half-moon cut-out on the cable end
(Figure 7) with the cable housing on the handlebars,
and slide together.
3. Hand-tighten the locking nut to connect the cable
(Figure 8).
Figure 6. Cable guide on the
handlebars
Figure 7. The half-moon cut-
out on the cable end
Figure 8. Hand-tightening the
locking nut