Filter
Top Products
Operation
4-13
Compaq Confidential – Need to Know Required
Writer: Debbie McRill Project: Compaq DAT AutoLoader Reference Guide Comments:
Part Number: 326817-003 File Name: e-ch4 Operation.doc Last Saved On: 12/20/99 2:35 PM
Table 4-1
LCD Messages - Alphabetical Listing
continued
LCD Message Message
Type
Meaning
Erase
Tape x
Status The drive is erasing data from the cassette x where x
represents the cassette number.
Illegal
Cassette
Config
Error This is an error message. A cassette was inserted in the
magazine incorrectly. The magazine will be ejected with the
incorrect cassette in position 7 or 8. Remove all cassettes
and reinsert them correctly, making sure they are put back in
the original positions they were in when first loaded in the
magazine.
Illegal
Magazine
Config
Error This is an error message. This occurs when there is at least
one, but less than seven cassettes in positions 1 through 7.
The magazine will eject. Reload according to one of the
configurations in the section, “Loading the Magazine With
Cassettes.”
Init
Element
Status
Info The AutoLoader is moving all cassettes back to their original
positions.
Ldr HW
Error
ResetReq
04xxxxxx
Error This is an AutoLoader hardware error. In some cases the 4
th
line can display additional information about the problem or it
can display the SCSI error code generated as M4sxxsxx
where the xx’s represent the additional sense code and
qualifier.
Load
Tape x
Status Loads cassette x into the drive, where x represents the
number of the cassete being loaded.
Locate
Tape x
Status The drive is finding a location on the tape specified by the
host. x represents the number of the cassette.
Magazine
Eject
Status The DAT AutoLoader is ejecting the magazine.
Magazine
Loading
Status Indicates a magazine has been inserted and is moving into
position in the AutoLoader.
Medium
Error
03xxxxxx
Error This is a medium error. There was a problem reading or
writing data to the cassette. A SCSI error code can be
displayed on the 3
rd
line as M3sxxsxx where the xx’s
represent the additional sense code and qualifier.
Move
Medium
x => Drv
Error Moves cassette x from the magazine to the drive, where x
represents the cassette number.
continued