Filter
Top Products
2-10
Compaq DAT AutoLoader Reference Guide
Compaq Confidential – Need to Know Required
Writer: Debbie McRill Project: Compaq DAT AutoLoader Reference Guide Comments:
Part Number: 326817-003 File Name: c-ch2 Installation.doc Last Saved On: 1/25/00 10:01 AM
NOTE:
The Compaq-provided LVD/SE terminator will be lit solid red in the single-ended
mode. The color red does not indicate an error. (See Figure 2-7.)
1
Figure 2-7. Terminator
IMPORTANT:
To “daisy chain” another DAT AutoLoader, remove the external terminator.
Connect the SCSI cable between the AutoLoaders and then connect the terminator to the
unused connector on the second AutoLoader.
5. Connect the power cord.
Completing the Installation
To complete the installation of the Compaq 20/40 GB DAT 8-Cassette
AutoLoader, install the device drivers. See Chapter 3, “Installing Software
Drivers,” for specific driver installation information.