Filter
Top Products
Page 2SKU 91995 For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Electrical Requirements 120 V / 60 Hz / 1800 Input Watts.
15.0 AMPs Start Up / 5300 RPM No Load.
Three Prong, Grounded, Power Cord Plug.
Power Switch Type: Squeeze Type.
Saw Blade (Included) Diameter/Type 10” Diameter / 60 Teeth.
7,000 Maximum RPM.
Arbor Size 5/8” Diameter.
Crosscut Capacity 4-11/16” x 2-15/16” @ 90°.
4-11/16” x 1-9/16” @ 45°.
Blade Tilt Capacity 0° - 45° Left and Right.
Positive Stops 0°, 15°, 22.5°, 30°, 45° Left and Right.
Overall Table Size 18-1/8” W x 5-3/8” L x 3-1/8” H.
Accessories Included Dust Bag / Extension Holders (Qty. 2).
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List on
page 23 are included. If any parts are missing or broken, please call Harbor Freight
Tools at the number shown on the cover of this manual as soon as possible.
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside of the
front cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING! Read all instructions
Failure to follow all instructions listed below may result in electric shock,
re, and/or serious injury. The term “power tool” in all of the warnings listed
below refers to your line-operated (corded) power tool or battery-operated
(cordless) power tool.
SAVE THESE INSTRUCTIONS
WORK AREA
Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
Do not operate power tools in explosive atmospheres, such as in the
presence of ammable liquids, gases, or dust. Power tools create sparks
which may ignite ammables.
1.
2.
E105017E105017
Rev 07k