Filter
Top Products
Page 12SKU 91995 For technical questions, please call 1-800-444-3353.
CAUTION! The Cross Pin (28) should always be activated in the “locked
down” position when the Saw is not being used and when the Saw is being
transported. The Cross Pin should be activated in the “locked up” position
only when changing Saw Blades. NEVER use the Cross Pin in any cutting
operation. The Cross Pin allows the operator to lock the Saw Blade in position,
preventing the Saw Blade from being raised or lowered. (See Figures E and F.)
5.
FIGURE E
CROSS PIN (28)
FIGURE F
SAW BLADE (56)
IN “LOCKED UP” POSITION